Functionalities:
- Master/Slave parallel and series operation with voltage and current sharing
- Stacking is allowed, space between units is not required
- High power system configuration from multiple units
- 19” rack mounting or laboratory use (feet included)
- Remote sensing
- Interlock
Specifications:
- Input voltage (single phase) : 90-265 V AC (48-62 Hz)
- Active Power Factor Correction (PFC) : 0.99 (at 100% load)
- Efficiency : up to 91% (at full load)
- Output ripple and spikes : from 1.8 mV rms / 8 mV pp
- Regulation : from 0.5 mV (0-100% load step)
- Recovery time : from 100 µs (50-100% load step)
- Programming speed : from 3.4 ms (10-90%), optional from 0.2 ms
- Analog programming accuracy : from 0.2%
- Output voltage and current stability : 6.10-5 / 9.10-5
- MTBF : 500.000 hrs
- Operating ambient temperature : -20 to +50 C
Standards:
- Power supply standard : EN 61204-3
- Generic Emission : EN 61326-1 (class B equipment, for use in domestic establishment)
- Generic Immunity : EN 61326-1 (equipment for use in industrial and domestic establishment)
- Safety : EN 60950 / EN 61010
- Insulation input / output : 3750 V rms
- Protection class : IP20
- cTÜVus
Dimensions and weight:
- Width = 19
- Height = 2 U
- Depth = 365 mm
- Weight = 9.9 kg
Options for SM1500 series
- P220 : Potentiometers repl. with encoders
Interfaces for SM1500 series
- P177 : PSC-ETH built-in
- P183 : PSC-232 built-in
- P273 : PSC-PB built-in
- P274 : PSC-CAN built-in
- P184 : PSC-488 built-in
- P218 : ISO AMP CARD built-in
High speed programming options SM1500 series
- P210 : for SM 15-100
- P211 : for SM 35-45
- P212 : for SM 52-30
- P213 : for SM 52-AR-60
- P214 : for SM 70-22
- P215 : for SM 120-13
- P216 : for SM 300-5
- P217 : for SM 400-AR-8
Power sink options SM1500 series
- P202 : for SM 15-100
- P203 : for SM 35-45
- P204 : for SM 52-30
- P205 : for SM 52-AR-60
- P206 : for SM 70-22
