Functionalities:
- Master/Slave parallel and series operation with voltage and current sharing
- Stacking is allowed, space between units is not required
- High power system configuration from multiple units
- Laboratory use (feet included), 19” rack mounting optional
- Remote sensing
- Interlock
Specifications:
- Input voltage (single phase) : 90-265 V AC (48-62 Hz)
- Active Power Factor Correction (PFC) : 0.99 (at 100% load)
- Efficiency : up to 89% (at full load)
- Output ripple and spikes : from 2 mV rms / 8 mV pp
- Regulation : from 0.2 mV (0-100% load step)
- Recovery time : from 100 µs (50-100% load step)
- Programming speed : from 4 ms (10-90%), optional from 0.2 ms
- Analog programming accuracy : from 0.2%
- Output voltage and current stability : 6.10-5 / 9.10-5
- MTBF : 500.000 hrs
- Operating ambient temperature : -20 to +50 ºC
Standards:
- Power supply standard : EN 61204-3
- Generic Emission : EN 61326-1 (class B equipment, for use in domestic establishment)
- Generic Immunity : EN 61326-1 (equipment for use in industrial and domestic establishment)
- Safety : EN 60950 / EN 61010
- Insulation input / output : 3750 V rms
- Protection class : IP20
Dimensions and weight:
- Width = half 19
- Height = 2 U
- Depth = 406 mm
- Weight = 5.4 kg
SM series general options
(not for SM3300 & SM15K series)
- P001 : Secured V and I setting (at front panel (screwdriver adjustment))
- P069 : Increased maximum output
Options for SM800-series
- P257 : Front panel connect. SM18-50
- P258 : Front panel connect. SM70-AR-24
- P259 : Front panel connect. SM400-AR-4
- P236 : Potentiometers repl. with encoders
Interfaces for SM800 series
- P256 : PSC-ETH built-in
- P254 : PSC-232 built-in
- P271 : PSC-PB built-in
- P272 : PSC-CAN built-in
- P255 : PSC-488 built-in
- P249 : ISO AMP CARD built-in
High speed programming options SM800 series
- P250 : for SM 7.5-80
- P251 : for SM 18-50
- P252 : for SM 70-AR-24
- P253 : for SM 400-AR-4 (not in combination with P248)
Power sink options SM800 series
- P245 : for SM 7.5-80
- P246 : for SM 18-50
- P247 : for SM 70-AR-24
- P248 : SM 400-AR-4 (not in combination with P253)
19″ Rack adapters for SM800 series
- RA 19-1SM800 for 1 pcs SM800
- RA 19-2SM800 for 2 pcs SM800
- RA 19-1SM800-FPC (front panel connection)
- RA 19-2SM800-FPC (front panel connection)
- RA 19-SM800-ES150
