ITECH IT8512BG+ 600V/15A/300W DC Electronic load – USB/LAN Interface
Voltage/current ripple measurement
Ripple is one of the parameters that must be tested for switching power supplies. Excessive ripple may cause interference to the DUT or shorten the life of the DUT. ITECH IT8512BG+ has a ripple measurement function, and its measurement bandwidth is up to 300kHz, which meets the ripple measurement requirements of switching power supplies or chargers. At the same time, its remote sense function can help to eliminate the impact caused by the voltage drop on the line. No oscilloscope needed, users can just press the ‘down’ button on the front panel to read the voltage ripple value (Vpp/Vp+/Vp-) and current ripple value (Ipp/Ip+/Ip-) of the DUT directly. This greatly simplifies the wiring and operation process.
Key Features and Functions
- Maximum power 300 W
- Voltage: 0-600 V
- Current: 0-15 A
- USB and LAN interface
- 7 operating modes: ?CC/CV/CR/CW/CR+CC/CV+CC/CR-LED
- Ripple measurement
- Dynamic mode up to 20kHz
- OPP/OCP test functions
- Battery discharge mode
- Automatic test functions
- List/dynamic mode
- Current monitoring
- Short circuit / Measure function
Key Specifications
DC Input Ratings:
- Maximum power 300 W
- Resolution: 10 mW
- Voltage: 0-5/0-600 V
- Resolution: 1 mV/10 mV
- Current: 0-3 A and 0-15 A
- Resolution: 0.1 mA/1 mA
- Resistance: 0.3-10 Ohm/10 Ohm to 7.5 kOhm
Operating modes:
- Static Mode
- Constant Voltage
- Constant Current
- Constant Resistance
- Constant Power
- CR+CC
- CV+CC
- CR-LED
- Dynamic Mode
- Continous Transient
- Pulsed transient
- Toggled transient
- List Mode
Setup Accuracy:
- Voltage: (0.05%+0.02% Full Scale)/(0.05%+0.025% Full Scale)
- Current: (0.05%+0.05% Full Scale)
- Resistance: (0.01%+0.08 S)/(0.01%+0.0008 S)
- Power: 0.1%+0.1% Full Scale
