It is equipped with measurement modes of many parameters such as surge current, peak value, effective value and PF(power factor). Voltage harmonics as high as 50 orders can be measured to make a comprehensive analysis of the performance of the measured object.
As standard the product is equipped with LAN and USB communication interfaces. The product is used to test UPS’s, inverters, AC power and relevant AC electronic components.
The load can be customized to be single phase or 3 phase or single+3 phase with or without a rack case.
AC Input Ratings:
- Maximum power 5400 W
- Resolution: 400 mW
- Voltage: 50-420 Vrms, (600 Volt peak)
- Current: 0.1-60 A, (180 A peak)
- Resolution: 2 mA
- Resistance: 9 Ohm-7.5 kOhm
- Resolution: 16 bit
- Crest factor: 1.414 to 5.0
- Resolution: 0.005
- Power factor: 0 to 1 lead or lag
- Resolution: 0.001
AC setup Accuracy:
- Current: (0.1%+0.2% Full Scale)
- Resistance: 0.2% + 0.01 S
- Power: 0.5%+0.5% Full Scale
- Crest factor: 0.5%/Irms + 1% of full scale
DC Input Ratings:
- Maximum power 5400 W
- Voltage: 10-600 V
- Resolution: 10 mV
- Current: 0.1-60 A
Meter Ratings:
- Voltage: 0-600 V
- Resolution: 10 mV
- Current: 0-180 A
- Resolution: 1 mA
Meter modes:
- S (VA), Q (VAR), P (W), Ip+, Ip-, Freq, THDv, CF, PF, R, FFT
Operating modes:
- Constant Current (DC and AC)
- Constant Resistance (DC and AC)
- Constant Power (DC and AC)
Feature set:
- Build in power analyzer
- Oscilloscope function
- Harmonic analysis
- High resolution display
- Adjustable Crest and Power factor
- Parallel and 3-phase coupling
- Intilligent fan control. Low acoustic noise
Connectivity:
- LAN, RS-232 and USB
- SCPI programming
- Analog control